Brother P-Touch PT-H100, Руководство по обслуживанию, Страница: 58 / 81

III - 35
Shift to < Figure 3.5-4 > by pressing / releasing the cassette sensor
2
.
In the same way, press / release the cassette sensor
3
and the cutter sensor in this
order.
Figure 3.5-4
Figure 3.5-5
When the NG is judged in any sensor, < Figure 3.5-6 > will be displayed. Shift to the
next sensor inspection, if the correct sensor is pressed while < Figure 3.5-6 > is
displayed.
(Shift to < Figure 3.5-5 > by pressing / releasing cassette sensor
3
at the state of
< Figure 3.5-4 >)
Shift to < Figure 3.5-7 > after completion of pressing / releasing cutter sensor.
Figure 3.5-6 NG Judgment Display Example
If < Figure 3.5-7 > is displayed, set the "12 mm laminate black ink ribbon TZe tape
cassette" and close the cover.
After closing the cover, print < Figure 3.5-8 > by pressing [ENTER] key. < Figure 3.5-9 >
will be displayed while printing.
Figure 3.5-7 Cassette Set Indication
C S T 3
C S T C
C S T 1 X
S E T 1 2 m m T Ze