manualshive.com logo in svg

Brother P-touch PT-580C, Руководство пользователя

Поделиться
Скачать
Brother P-touch PT-580C Скачать руководство пользователя страница 127

123

ERROR MASSAGE

CAUSE

REMEDY

 LENGTH LIMIT!

•

The length of one label message

  is limited to one meter.
  This message appears if a chara-
  cter, symbol, diacritical mark, bar
  code, space, return or new block
  is entered, causing the text to
  exceed the one meter limit.

•

This message appears if the

  entered text exceeds the one
  meter limit when the power is
  turned on or while trying to print.

•

This message appears if a

  file is recalled and joined to
  the current message, causing
  the text to exceed the one meter
  limit.

•

This message appears if the

  

RETURN

 key is pressed in

  Format mode, causing the text
  to exceed the one meter limit.

•

Delete some of the text or

  reduce the character size.

•

Delete some of the text or

  reduce the character size.

•

Press the 

CANCEL

 key and

  delete some of the text before
  recalling the file or joining the
  working area text and the file.

•

 Press the 

CANCEL

 key and

  delete some of the text before
  entering a frame or other gro-
  bal format setting.

 LINE LIMIT!

•

This message appears if the

  number of lines in the text is
  greater then the maximum
  number of lines possible for
  the installed tape.

•

Reduce the number of lines

  or install a tape of greater
  width.

 MEMORY FULL!

•

This machine can store about

  3,400 characters in its memory.
  This message appears when you
  try to store a message that is too
  large to fit in the available memory
  space.

•

Stop trying to store the mes-

  sage or delete an unwanted
  file to make room for the new
  one.

 NO FILES!

•

This message appears if you

  try to recall or delete a text file
  from the memory when none
  are currently stored.

•

Do not attempt to recall or

  delete a text file.

 NO TAPE!

•

This message appears if you

  attempt to print a label or feed
  the tape when a tape cassette
  is not installed.

•

Install a tape cassette and

  try again.

Содержание P-touch PT-580C





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды