Brother P-Touch PT-2730, Руководство по обслуживанию

Страница: 21 / 105

III - 1
CHAPTER III DISASSEMBLY & REASSEMBLY
■
Safety Precautions
(1) The disassembly or reassembly work should be carried on a grounded antistatic
sheet. Otherwise, the LSIs and electronic parts may be damaged due to the
electricity charged in your body.
(2) When transporting PCBs, be sure to wrap them in conductive sheets such as
aluminum foil.
(3) When using soldering irons and other heat-generating tools, take care not to
damage the resin parts such as wires, PCBs, and covers.
(4) Be careful not to lose small parts such as screws, washers, or other parts removed
for parts replacement.
(5) Tighten screws according to the tightening torque lists below.
(6) Lubricate according to the lubrication points list.
■ Tightening Torque List
Location Screw type Q'ty Tightening torque N·m (kgf·cm)
Cassette cover ASSY
Bottom cover
Chassis ASSY
Head ASSY
Photo interrupter ASSY
DC motor ASSY
Cutter ASSY
Cutter motor ASSY
Full cutter sensor PRO ASSY
Power PCB ASSY
Cassette PCB ASSY
PCB holder
Main PCB ASSY PStite M2 x 4 CH
Taptite, bind B M2.6 x 10
Taptite, bind B M2.6 x 8
Screw, bind M3 x 4
Screw, pan M1.7 x 3
Screw, pan M1.7 x 3
Screw, pan (S/P washer) M3 x 6 DA
Screw, pan M1.7 x 2.5
Screw, pan M1.7 x 6
Taptite, bind B M2.6 x 8
Taptite, bind B M2.6 x 8
Taptite, bind B M2.6 x 8
Taptite, bind B M2.6 x 8 1
6
3
1
2
2
1
2
1
1
1
2
2 0.157 0/-0.049 (1.6 0/-0.5)
0.392 ± 0.049 (4 ± 0.5)
0.294 ± 0.049 (3 ± 0.5)
0.490 ± 0.098 (5 ± 1)
0.147 ± 0.049 (1.5 ± 0.5)
0.147 ± 0.049 (1.5 ± 0.5)
0.588 ± 0.098 (6 ± 1)
0.147 ± 0.049 (1.5 ± 0.5)
0.147 ± 0.049 (1.5 ± 0.5)
0.294 ± 0.049 (3 ± 0.5)
0.294 ± 0.049 (3 ± 0.5)
0.294 ± 0.049 (3 ± 0.5)
0.294 ± 0.049 (3 ± 0.5)