Brother MFC-J6920DW, Руководство пользователя

Страница: 149 / 223

Troubleshooting
135
B
Sending Faxes
Difficulty Suggestions
Cannot send a fax. Check all line cord connections. Make sure the telephone line cord is plugged into
the telephone wall jack and the LINE jack inside the machine.
Print the Transmission Verification Report and check for an error. (See Advanced
User’s Guide:
Reports .)
Call your administrator to check your Secure Function Lock Settings.
Ask the other party to check that the receiving machine has paper.
Poor fax send quality. Try changing your resolution to
Fine
or
S.Fine
. Make a copy to check your
machine's scanner operation. If the copy quality is poor, clean the scanner. (See
Cleaning the scanner on page 101.)
Transmission Verification Report
says
RESULT
:
NG
.
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get
RESULT
:
NG
on the Transmission
Verification Report, your machine may be out of memory. To gain extra memory,
you can turn off Memory Receive (See Advanced User’s Guide:
Turning off
Memory Receive operations .), print fax messages from the machine’s memory
(See Advanced User’s Guide: Printing a fax from the memory .), or cancel a
Delayed Fax or Polling Job. (See Canceling a fax in process on page 51.)
(See Advanced User’s Guide: Checking and canceling waiting jobs .) If the
problem continues, ask the telephone company to check your telephone line.
If you often get transmission errors due to possible interference on the telephone
line, try changing the machine's Compatibility setting to
Basic(for VoIP)
.
(See Telephone line interference / VoIP on page 139.)
Sent faxes are blank. Make sure you are loading the document correctly. (See Loading documents
on page 45.)
Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction fluid
on the glass strip. Clean the glass strip. (See
Cleaning the scanner on page 101.)
Handling Incoming Calls
Difficulty Suggestions
The machine “hears” a voice as a
CNG Tone. If Easy Receive is set to
On
, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax-receiving tones. Deactivate the machine by pressing .
Try avoiding this problem by turning Easy Receive to
Off
.
(See Easy Receive on page 57.)
Sending a fax call to the machine. If you answered on an extension telephone, press your Fax Receive Code (the
factory setting is
l
5 1 ). If you answered on the external telephone (connected to
the EXT. jack), press
Fax Start
, and then press
Receive
to receive the fax.
When your machine answers, hang up.