Brother MFC-J5910DW, Руководство по обслуживанию

Страница: 6 / 20

iv Confidential
9.5 ADF Unit .............................................................................................................. 3-55
9.6 Control Panel ASSY ............................................................................................ 3-70
9.7 Disassembly of Control Panel ASSY................................................................... 3-71
9.8 Speaker and Upper Cover................................................................................... 3-74
9.9 Ink Cartridge Cover, Front Cover, Wireless LAN PCB and
Media Module Cover ........................................................................................... 3-76
9.10 Main PCB ............................................................................................................ 3-78
9.11 Jam Clear Cover.................................................................................................. 3-82
9.12 MJ/PS Shield Unit (MJ PCB and Power Supply PCB) ........................................ 3-83
9.13 CR Encoder Strip and its Guard Film .................................................................. 3-88
9.14 Carriage PCB ASSY, Ink Refill ASSY and Ink Cartridge Detection Sensor
PCB ..................................................................................................................... 3-90
9.15 Ink Absorber Box, Ink absorber Felt (for Ink Refill ASSY) and PF Encoder
Disk...................................................................................................................... 3-96
9.16 Duplex-printing Related Components.................................................................. 3-98
9.17 Engine Unit, Flushing Box and Ink Cartridge Cover Sensor.............................. 3-100
9.18 Components on the Engine Unit
(Earth spring, Maintenance unit, Carriage motor, CR support chassis, Star wheel
holder, Intermediate roller, Inner paper guide, Switchback paper sensor PCB ASSY,
Platen, DX chute roller holder ASSYs, Inner chute ASSY, Registration sensor PCB
ASSY and actuator, PF encoder/PF sensor harness unit and actuator, PF encoder
disk, Paper feed motor, and Paper pull-in roller ASSY) .................................... 3-104
9.19 Paper Tray ASSY .............................................................................................. 3-117
CHAPTER 4 ADJUSTMENTS AND UPDATING OF SETTINGS, REQUIRED AFTER
PARTS REPLACEMENT............................................................................... 4-1
1 IF YOU REPLACE THE HEAD/CARRIAGE UNIT OR ENGINE UNIT .......................... 4-1
1.1 Update the head property data stored in the EEPROM on the main PCB*........... 4-2
1.2 Clean the new head/carriage unit (Function code 76)........................................... 4-5
1.3 Print out a nozzle test pattern (Function code 09)................................................. 4-6
1.4 Adjust the inclination of the head/carriage unit...................................................... 4-7
1.5 Update the paper feeding correction value (Function code 58)........................... 4-10
1.6 Adjust the height of the platen ............................................................................. 4-10
1.7 Align vertical print lines in monochrome (Function code 65) ............................... 4-12
1.8 Adjust margins in borderless printing (Function code 66) ................................... 4-12
1.9 Create head calibration data and write it into flash ROM
(Function code 02)............................................................................................... 4-12
1.10 Print out a total quality check pattern .................................................................. 4-13
1.11 Switch back to standby........................................................................................ 4-15
1.12 Replace the ink cartridges with the protective part.............................................. 4-15