50
(MFC-J5520DW/J5620DW)
Current Tray #1
Settings
Current MP Tray
Settings
(MFC-J5720DW)
Current Tray #1
Settings
Current Tray #2
Settings
Current MP Tray
Settings
These messages are displayed when
the Check Paper setting to confirm
the paper type and size is enabled.
To not display this confirmation
message, set the Check Paper
setting to
Off
. (See
Data Remaining in
Memory
Print data is left in the machine's
memory.
Press
. The machine will cancel
the job and clear it from the memory.
Try to print again.
Disconnected
The other person or other person's
fax machine stopped the call.
Try to send or receive again.
If calls are stopped repeatedly and
you are using a VoIP (Voice over IP)
system, try changing the
Compatibility to
Basic(for VoIP)
.
Telephone Line Interference or
Document Jam/too Long
The document was not inserted or fed
correctly, or the document scanned
from the ADF was too long.
DR Mode in Use
The machine is in Distinctive Ring
mode. You cannot change the
Receive Mode from
Manual
to
another mode.
Set Distinctive Ring to
Off
.
(See Online User’s Guide:
Register
the Distinctive Ring Pattern
.)
High Temperature
The room temperature is too high.
After cooling the room, allow the
machine to cool down to room
temperature. Try again when the
machine has cooled down.
Hub is Unusable.
A hub or USB flash drive with hub has
been connected to the USB direct
interface.
Hubs, including a USB flash drive that
has a built-in hub, are not supported.
Unplug the device from the USB
direct interface.
Image Too Long
The proportions of your photo are
irregular so effects could not be
added.
Choose a regularly proportioned
image.
Image Too Small
The size of your photo is too small to
trim.
Choose a larger image.
Error Message
Cause
Action
Содержание MFC-J5620DW
Страница 1: ...Basic User s Guide MFC J5520DW MFC J5620DW MFC J5720DW Version 0 USA CAN ...
Страница 94: ...82 ...