Brother MFC-9050, Руководство по обслуживанию

Страница: 64 / 200

IV - 20
n n
Reassembling Notes
• When reinstalling the scanner motor, fit it in the latch provided on the scanner frame with the
connector facing up and then secure it with the screw. (See page IV-17.)
• When setting the scanner frame ASSY back into place,
- secure the grounding terminal to the scanner frame ASSY with the screw and route the
grounding wire around boss "x" (as shown on page IV-16),
- route the CIS harness through the scanner frame ASSY (or connect the CIS harness to the
CIS unit if mounted),
- route the panel-main harness through the cutout provided in the scanner frame ASSY.
• When reinstalling the CIS unit, first connect the CIS harness, insert the left end under the arm
of the scanner frame, put the CIS unit into the scanner frame, and move it to right (see the
illustration given on page IV-15).
• When attaching the CIS film, align the right, left and rear edges of the cutout with those
provided in the scanner frame and fit its two tabs into the scanner frame, as illustrated on page
IV-14.
• When connecting the scanner motor harness to the scanner motor connector, take care not to
bend the shield film.
• Once removed, the shield film becomes unusable and a new part will have to be put back in.