manualshive.com logo in svg

Brother MFC-8880DN, Руководство пользователя

Поделиться
Скачать
Brother MFC-8880DN Скачать руководство пользователя страница 170

160

c

Push down the blue lock lever and take 
the used toner cartridge out of the drum 
unit.

 

WARNING

 

DO NOT put a toner cartridge into a fire. It 
could explode, resulting in injuries.

 

IMPORTANT

• Handle the toner cartridge carefully. If 

toner scatters on your hands or clothes, 
wipe or wash it off with cold water at once.

• To avoid print quality problems, DO NOT 

touch the shaded parts shown in the 
illustrations.

 

• Brother machines are designed to work 

with toner of a particular specification and 
will work to a level of optimum 
performance when used with genuine 
Brother toner cartridges (TN-3250/TN-
3290). Brother cannot guarantee this 
optimum performance if toner or toner 
cartridge of other specifications are used. 
Brother does not therefore recommend 
the use of cartridge other than genuine 
Brother cartridges with this machine, or 
the refilling of used cartridge with toner 
from other sources. If damage is caused 
to the drum unit or other part of this 
machine as a result of the use of toner or 
toner cartridge other than genuine Brother 
products due to the incompatibility or lack 
of suitability of those products with this 
machine, any repairs required as a result 
may not be covered by the warranty. 

• Unpack the toner cartridge just before you 

put it in the machine. If a toner cartridge is 
left unpacked for a long time, the toner life 
will be shortened.

• Be sure to seal up the used toner cartridge 

tightly in a suitable bag so that toner 
powder does not spill out of the cartridge.

 

Содержание MFC-8880DN











































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды