manualshive.com logo in svg

Brother MFC-8370DN, Руководство пользователя

Поделиться
Скачать
Brother MFC-8370DN Скачать руководство пользователя страница 130

120

Scanning difficulties

C

Software difficulties

C

Paper handling difficulties

C

Difficulties

Suggestions

TWAIN errors appear while 
scanning.

Make sure that the Brother TWAIN driver is chosen as the primary source. In 
PaperPort™ 11SE, click 

File

, 

Scan or Get Photo

 and choose the 

Brother TWAIN driver

.

OCR does not work

Try increasing the scanning resolution.

Network scanning does not work.

See 

Network difficulties

 on page 121.

The machine does not scan all the 
pages of your document.

Make sure that the ADF output tray does not contain more than 20 sheets.

Difficulties

Suggestions

Cannot install software or print.

Run the 

Repair MFL-Pro Suite

 program on the CD-ROM. This program will repair 

and reinstall the software.

Cannot perform ‘2 in 1’ or ‘4 in 1’ 
printing.

Check that the paper size setting in the application and in the printer driver are the 
same.

The machine does not print from 
Adobe

®

 Illustrator

®

. 

Try to reduce the print resolution. (See 

Advanced tab

 in the 

Software User’s Guide

 

on the CD-ROM.) 

Difficulties

Suggestions

The machine does not load paper.

The LCD shows 

No Paper

 or a 

Paper Jam message. 

„

If there is no paper, load a new stack of paper into the paper tray.

„

If there is paper in the paper tray, make sure it is straight. If the paper is curled, 
you should straighten it. Sometimes it is helpful to remove the paper, turn the 
stack over and put it back into the paper tray.

„

Reduce the amount of paper in the paper tray, and then try again.

„

Check that the MP tray mode is not chosen in the printer driver.

„

If the LCD shows Paper Jam message and you still have a problem, see 

Paper jams

 on page 139.

The machine does not feed paper 
from the MP tray.

„

Fan the paper well and put it back in the tray firmly.

„

Make sure that MP tray mode is chosen in the printer driver.

How do I print on envelopes?

You can load envelopes from the MP tray. Your application must be set up to print 
the envelope size you are using. This is usually done in the Page Setup or 
Document Setup menu of your application. (See your application’s manual for 
more information.)

What paper can I use?

You can use thin paper, plain paper, thick paper, bond paper, recycled paper, 
envelopes, labels and transparencies that are made for laser machines. (For 
details, see 

Acceptable paper and other print media

 on page 14.)

There is a paper jam.

(See 

Paper jams

 on page 139.)

The scanned documents jam on 
the ADF output tray.

„

Make sure your documents are not too thin or too thick and are correctly 
loaded in the ADF. (See 

Loading documents

 on page 19.)

„

Use the scanner glass to scan the document.

Содержание MFC-8370DN
























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды