Brother MFC-760, Руководство по обслуживанию

Страница: 167 / 488

V - 40
WSW31
(Function setting 9)
Selector
No.
Function Setting and Specifications
1 Not used.
2
Default reduction rate for failure of
automatic reduction during
recording
0: 100% 1: 70%
3 Backing up received data 0: Yes 1: No
4 Black ink empty sensor 0: Yes 1: No
5
Minimum short-OFF duration in
distinctive ringing
0: 130 ms 1: 90 ms
6
|
8
Not used.
NOTE: Selector 5 is applicable only to the U.S.A. versions.
l l
Selector 2: Default reduction rate for failure of automatic reduction during recording
This selector sets the default reduction rate to be applied if the automatic reduction function fails
to record one-page data sent from the calling station in a single page of the current recording
paper.
If it is set to "0," the equipment records one-page data at full size (100%) without reduction; if it is
set to "1," the equipment records it at 70% size.
l l
Selector 3: Backing up received data
This selector determines whether the equipment backs up received data into the DRAM (just as in
the backup operation to be performed if a paper-empty error, ink-empty error or cover-open error
occurs). Only the data received at the latest five transmission sequences may be backed up. To
print out the backed-up data, press the
Help
key while holding down the
Shift key, or carry out
purging operation.
l l
Selector 5 Minimum short-OFF duration in distinctive ringing
The ringer pattern consists of short and long rings, e.g., short-short-long rings. This selector sets
the minimum OFF duration following a short ring in order to avoid missing ringer tones in
distinctive ringing.
If this selector is set to "1," when the short-OFF duration is a minimum of 90 ms long, then the
equipment will interpret the short-OFF as OFF.