Brother MFC-7340 Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 194

Brother MFC-7340 Скачать руководство пользователя страница 107

Safety and legal

97

A

16 Unplug this product from the wall outlet and refer servicing to Authorized Service Personnel

under the following conditions:

If the power cord is damaged or frayed.

If the product has been spilled by liquid.

If the product has been exposed to rain or water.

If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions. Incorrect
adjustment of other controls may result in damage and will often require extensive work by
a qualified technician to restore the product to normal operation.

If the product has been dropped or the casing has been damaged.

If the product exhibits a distinct change in performance, indicating a need for service.

17 To protect your product against power surges, we recommend the use of a power protection

device (Surge Protector).

WARNING

For protection against the risk of electrical shock, always disconnect all cables from the wall
outlet before servicing, modifying or installing the equipment.

This equipment may not be used on coin service lines provided by the telephone company or
connected to party lines.

Brother cannot accept any financial or other responsibilities that may be the result of your use
of this information, including direct, special or consequential damages. There are no warranties
extended or granted by this document.

«
...
105
106
107
108
109
...
»

Содержание MFC-7340



































































































































































































Отзывы:

Нет отзывов