Brother MFC-6800, Руководство пользователя

Страница: 63 / 222

S E T U P S E N D
6 - 4
Manual Transmission (With an External Telephone)
Manual transmission lets you hear the dial tone, ringing and fax receiving tones
before sending the fax.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Pick up the handset of the external phone and listen for a dial tone.
3
Enter the fax number you want to call. (You can enter the digits using the dial
pad, Speed Dial or Search).
4
When you hear the fax tone, press Fax Start .
5
Replace the handset of the external phone.
Automatic Transmission
This is the easiest way to send a fax.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Enter the fax number using the dial pad, Speed Dial or Search.
(See
Speed Dialing , page 7-3.)
3
Press
Fax Start
.
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to
try again. Anytime you want to make a second call to the last number dialed,
press
Redial/Pause to save time.
If you’re sending a fax automatically and the line is busy, the MFC will
automatically redial (up to three times at 5 minute intervals).
Dual Access
You can place an original in the ADF and set temporary settings, dial a number,
and begin scanning the fax into memory—even when the MFC is receiving a
fax, sending a fax, or printing a fax from memory. The LCD shows the new job
number and available memory.
1
Place the original face up in the ADF.
2
Enter the fax number.
Note
If you get a OUT OF MEMORY message while scanning the first page of a
fax, press
Stop/Exit
to cancel scanning. If you get a OUT OF MEMORY
message while scanning in a subsequent page, you’ll have the option to press
Fax Start
to transmit the pages scanned so far, or to press
Stop/Exit
to cancel
the operation.