Brother MFC 5490CN - Color Inkjet - All-in-One Скачать руководство пользователя страница 306

Страница: 306 / 439

9-21

Confidential

Restoration Procedure

(1) Insert the external memory containing the backup data into the slot of the machine in the

initial stage of the maintenance mode.

The "**** Active" appears on the LCD.

NOTE:

Do not insert more than one external memory at a time.

NOTE:

If the serial number in the backup data stored in the external memory does not

match that of the machine, data restoration cannot be performed.

(2) Press the

and

keys in this order.

The "Export to Card" appears on the LCD.

(3) Press the or key until the desired item, any of the following, appears on the LCD.

"Import from Card" for restoring only user data

"Import all" for restoring all backup data including machine information

(4) Press the

Black Start

(

Mono Start

) key.

The "********.msd" appears on the LCD. The "********" is unique to each model.

(5) Press the

Black Start

(

Mono Start

) key.

The "Import from Card" or "Import all" appears again on the LCD.

(6) Press the

Black Start

(

Mono Start

) key.

The "Please wait" appears on the LCD.

NOTE:

Never remove the external memory from the machine when the exporting is in

progress.

(7) Wait for the machine to automatically return to the initial stage of the maintenance mode

and show "**** Active" on the LCD.

Remove the external memory from the machine and keep it in a safe place.

NOTE:

If any of the error messages shown on the previous page appears, press the

Stop/Exit

key, and the machine returns to the initial stage of the maintenance mode.

Содержание MFC 5490CN - Color Inkjet - All-in-One
























































































































































































































































































































































































































































Результаты поиска

Содержание MFC 5490CN - Color Inkjet - All-in-One

Отзывы:

Бренды по названию

Популярные бренды

Brother MFC 5490CN - Color Inkjet - All-in-One, Руководство по обслуживанию

Результаты поиска

Содержание MFC 5490CN - Color Inkjet - All-in-One

Отзывы:

Бренды по названию

Популярные бренды