Brother MD-602, Руководство по обслуживанию

Страница: 53 / 76

47
MD-602, 612
18. Parameter list
(Note) The default data is the value set in B737 with the machine head setting.
Display No. Initial data
Data setting
Detailes
range
02 00 to 90 (
×
10)
Thread wiper ON delay time
(20ms) (0 to 990ms)
05 00 to 90 (
×
10)
Thread wiper ON time
(50ms) (0 to 990ms)
05 00 to 90 (
×
10)
Wiper OFF to presser lifting ON delay time
(50ms) (0 to 990ms)
30 00 to 90 (
×
10)
Presser lifter full-ON time
(300ms) (0 to 990ms)
00 to 30 (
×
10) Holding time of presser lifter
60 (0 to 30 sec) 00 : Does not turn OFF automatically
(3 min) 31 to 96 (
×
5) 01 to 30 : 1 to 30 sec (Set in one second increments)
(35 sec to 6 min) 31 to 96 : 35 sec to 6 min (Set in five seconds increments)
15 00 to 99 (
×
10)
Delay time from presser lifter is lowered to motor start.
(150ms) (0 to 990ms)
00 00 to 99 (
×
2) Presser UP signal OFF time (soft down)
(0ms) (0 to 198ms) * Valid only when memory switch [35] is set to ON
00 00 to 30 (
×
10)
Presser up signal ON time (soft down)
(0ms) (0 to 300ms)
00 00 to 99 (not used)
00 00 to 99 (not used)
07 01 to 99 (not used)
07 01 to 99 (not used)
10 01 to 99 (not used)
24 00 to 47
Start tacking A
→
B reverse solenoid ON timing
(pulse) (pulse)
(The larger the value is, the larger the timing delays.)
(The smaller the value is, the faster the timing becomes.)
24 00 to 47
Start tacking B end reverse solenoid OFF timing
(pulse) (pulse)
(The larger the value is, the larger the timing delays.)
(The smaller the value is, the faster the timing becomes.)
24 00 to 47
End tacking C
→
D reverse solenoid ON timing
(pulse) (pulse)
(The larger the value is, the larger the timing delays.)
(The smaller the value is, the faster the timing becomes.)
End tacking D
→
C or C ON reverse solenoid ON timing
24 00 to 47 (The larger the value is, the larger the timing delays.)
(pulse) (pulse) (The smaller the value is, the faster the timing becomes.)
* When memory switch [22], [26] is set to ON
10 05 to 50 (
×
10) Stop time during reverse change timing
(100ms) (50 to 500ms) * When memory switch [68] is set to ON
11 00 to 23
Temporary stop position during reverse change timing
(pulse) (pulse)
(Number of pulses from needle UP signal)
* When memory switch [68] is set to ON
t0
t1
t2
F0
F1
F2
F3
F4
F5
F6
F9
F8
FA
b0
b1
b2
b3
b5
b4