LT-5100 PC Real-time Video Controller V7.6
Page 19 of 22
8
．
3 The brightness of the screen
The screen brightness can be adjusted by dragging the slip to achieve the best viewing
effect
，
as shown in Figure 26. This setting can be done when the viewfinder frame is working.
Figure 26
8
．
4 Setting messages
1
．
Import text: Import the text in “Message”, then click on the key “Refresh”.
2
．
Set the moving mode of the message: click on the “moving” key and will see a dialog as
shown in Figure 27.after finishing the settings, clicking on “OK” to apply, or “Cancel” to give
up. There are the following three settings:
Moving Orientation
①
：
there are five orientations, Left
（
The message is moving from right
to left
）
、
Right
（
Moving from left to right
）
,Up
（
Moving from down to
up
）
、
Down
（
Moving from up to down
）
,Static
（
The text is static
）
.
Character Position
②
：
Top
（
The message is displayed on the top of the screen
）
,Center
（
Displayed on the center of the screen
）
, Bottom
（
Displayed on the
bottom of the screen
）
.
Moving sp
③
eed
：
the moving speed of the message can be changed by dragging the
sliding strip
，
the Minimum and Max. speed is 1 Pix/s and 100 Pix/s.
respectively.
Figure 27 The moving mode of the words
