- 8 -
Height of the needle bar
Standard
•
When the needle is at the right side, the shuttle hook point is aligned with the left side of the needle, the
shuttle hook point lower edge should be 0.8 - 1.2mm above the upper edge of the needle eye.
Adjustment
1. Set the stitch width konb to 5, then lower the needle to its lowest position at the right side of the needle
plate.
2. Loosen the setscrew
of the needle bar
.
3. Move the needle bar
up or down to make adjustment.
4. Retighten the setscrew
.
