Brother Innov-is NX600, Руководство по обслуживанию

Страница: 101 / 214

3 - 25
Electrical parts and motors Main unit
Assembly
1
NP PCB assy. attachment
1. Attach the PCB holder
1
to the arm bed using the screws
1
(three).
2. Attach NP PCB assy.
2
and the insulation sheet
3
to the PCB holder
1
using the screws
2
(two).
Start movie clip (CD-ROM version only)
1
Torque
0.59 – 1.78 N·m
2
Torque
0.78 – 1.18 N·m
2 , 3
1 1
2
Taptite, Bind B
M 3X8
Color; Gold
Screw, Bind
M 4X8
Color; Silver
2
Main PCB assy. attachment
1. Attach the main PCB assy.
1
to the PCB holder and arm bed using the
screws
1
(two) and the screw
2
.
*Key point
• Fully tighten the screw
1
in the PCB assy. holder holes (four)
in the two locations on the right side.
Start movie clip (CD-ROM version only)
1
Torque
0.59 – 1.78 N·m
2
Torque
0.78 – 1.18 N·m
1
2 1
Holder holes
Taptite, Bind B
M 3X8
Color; Gold
Screw, Bind
M 4X8
Color; Silver