Brother Innov-is 2800D Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 224

Brother Innov-is 2800D Скачать руководство пользователя страница 4

2

FOR USERS IN THE UK, EIRE,

MALTA AND CYPRUS ONLY

IMPORTANT

In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the

mark, rating as marked on plug.

• Always replace the fuse cover. Never use plugs with the fuse cover omitted.

• If the available electrical outlet is not suitable for the plug supplied with this equipment, you should

contact your authorized dealer to obtain the correct lead.

FOR USERS IN AC INPUT 220-240V

COUNTRIES AND MEXICO

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.

«
...
2
3
4
5
6
...
»

Содержание Innov-is 2800D

































































































































































































































Отзывы:

Нет отзывов