Brother HS-3000, Руководство по обслуживанию

Страница: 100 / 164

3 - 47
Needle-presser unit Main unit
Assembly
13
Thread take-up lever and needle bar crank attachment
1. Apply a light covering of MOLYKOTE EM-30L to the thread take-up
lever attachment section of the needle bar crank
1
.
2. Attach the thread take-up lever
2
to the needle bar crank
1
with the
screw
1
.
3. Apply a light covering of MOLYKOTE EM-30L to the shaft of the thread
take-up lever
3
.
4. Attach the thread take-up lever assy.
4
to the thread take-up lever link
5
,
and then attach the needle bar crank rod
6
to the needle bar crank
1
and
the needle bar block
7
.
*Key point
• Move the shaft 8 to the right, and then attach the thread take-
up lever assy. 4 .
5. Tighten the screw
2
.
6. Temporarily tighten the needle bar block
7
and the needle thread block
8
with the screw
3
.
Apply MOLYKOTE EM-30L to the thread take-up lever
attachment section of the needle bar crank. Light covering
XC8385***
Apply MOLYKOTE EM-30L to the shaft of the thread
take-up lever. Light covering
XC8385***
1
Torque
1.18 — 1.57 N
·
m
2
Torque
0.59 — 0.78 N
·
m
3
Torque
Hand tighten
2
1
1
3
5
6
4
9
3
2
8
1
7
Screw, Flat
SM3.57-40X7 L
Screw
M3X8
Set Screw, Socket (FT)
M4X4
14
BH switch assy. attachment
1. Attach the BH switch assy.
1
with the screw
1
.
NOTE
• Align the boss 2 on the base holder with the hole on the BH
switch assy. 1 .
1
Torque
1.18 — 1.57 N
·
m
1 1
2
Screw, Pan (S/P washer)
M 4X8