Brother HS-2000 страница 67 Скачать руководство пользователя

Страница: 67 / 72

The fabric is

wrinkled.

You have not threaded the upper thread

properly or fitted the bobbin properly.

Thread the upper thread and wind

the bobbin thread properly.

page 14, 15, 16

You have not fitted the spool properly. Fit the spool properly.

–

You have not used the right combina-

tion of fabric, thread and needle.

Choose a thread and needle that are

appropriate for the type of fabric.

page 20

The needle is bent or blunt.

Replace the needle.

page 21

If you are sewing thin fabric, the

stitch is too thick.

Sew with stabiliser material under

the fabric.

page 33

The thread tension is incorrect.

Adjust the tension of the upper thread.

page 29

Stitches are

skipped.

You have not threaded the upper

thread properly.

Correct the upper threading.

page 16

You have not used the right combi-

nation of fabric, thread and needle.

Choose a thread and needle that are

appropriate for the type of fabric.

page 20

The needle is bent or blunt.

Replace the needle.

page 21

You have not inserted the needle properly.

Insert the needle properly.

Dust has accumulated under the

needle plate or in the bobbin case.

Remove the needle plate cover and

clean the plate and the bobbin case.

page 61

There is a high-

pitched noise

while sewing.

Dust has built up in the feed dogs or

in the bobbin case.

Clean the bobbin case.

page 61

You have not threaded the upper

thread properly.

Correct the upper threading.

page 16

The bobbin case is scratched.

Replace the bobbin case.

Contact your retailer or the nearest

authorized service center.

–

You have not used bobbin that has

been designed for this machine.

Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.

page 11

The needle

threader can not

be used.

You have not moved the needle

holder to its highest position.

Raise the needle either by turning the
handwheel toward you
(counterclockwise) so that the mark on
the wheel points up or by pressing

(needle position button) once or twice.

page 16

You have not inserted the needle properly.

Insert the needle properly.

page 21

The stitch is not

sewn correctly.

The presser foot that you are using is

not correct for the type of stitch.

Attach the presser foot that is correct for

the type of stitch that you want to sew.

page 56

The thread tension is incorrect.

Adjust the tension of the upper

thread.

page 29

The thread is tangled, for example,

in the bobbin case.

Remove the tangle thread. If the
thread is tangled in the bobbin case,
clean the bobbin case.

page 61

The fabric does

not feed.

The feed dogs are lowered.

Slide the feed dog position lever to

. page 42, 49

The stitch is too fine.

Lengthen the stitch length.

page 27

You have not used the right combi-

nation of fabric, thread and needle.

Choose a thread and needle that are

appropriate for the type of fabric.

page 20

The thread is tangled, for example,

in the bobbin case.

Remove the tangle thread. If the
thread is tangled in the bobbin case,
clean the bobbin case.

page 61

The sewing light

bulb does not

come on.

The sewing lamp is damaged.

Contact your retailer or the nearest

authorized service center.

–

Symptom

Possible cause

How to put it right

Reference

Содержание HS-2000









































































Результаты поиска

Содержание HS-2000

Отзывы:

Похожие инструкции для HS-2000

Бренды по названию

Популярные бренды

Brother HS-2000, Руководство по эксплуатации

Результаты поиска

Содержание HS-2000

Отзывы:

Похожие инструкции для HS-2000

Бренды по названию

Популярные бренды