Brother HL-7050 Series Скачать руководство пользователя

Страница: 10 / 326

REGULATION

viii

REGULATION

LASER SAFETY (110 - 120V MODEL ONLY)

This printer is certified as a Class

laser product under the US Department of Health and

Human Services (DHHS) Radiation Performance Standard according to the Radiation

Control for Health and Safety Act of 1968. This means that the printer does not produce

hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within the protective

housing and external covers. The laser beam cannot escape form the machine during any

phase of user operation.

FDA REGULATIONS (110 - 120V MODEL ONLY)

The US Food and Drug Administration (FDA) has implemented regulations for laser

products manufactured on and after August 2, 1976. Compliance is mandatory for

products marketed in the United States. One of the following labels on the back of the

printer indicates compliance with the FDA regulations and must be attached to laser

products marketed in the United States.
The label for Japanese manufactured products

MANUFACTURED:

BROTHER INDUSTRIES, LTD.

15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561,

Japan.

This product complies with FDA radiation performance

standards, 21 CFR Subchapter J.

The label for Chinese manufactured products

MANUFACTURED:

BROTHER Corporation (Asia) Ltd.

Shenzen Buji Nan Ling Factory

Gold Garden Ind., Nan Ling Village, Buji, Rong Gang,

Shenzen, CHINA

This product complies with FDA radiation performance

standards, 21 CFR Subchapter J.

Caution

Use of controls, adjustments or performance of procedures other than those specified in

this manual may result in hazardous radiation exposure.

Содержание HL-7050 Series







































































































































































































































































































































Результаты поиска

Содержание HL-7050 Series

Отзывы:

Похожие инструкции для HL-7050 Series

Бренды по названию

Популярные бренды

Brother HL-7050 Series, Руководство по обслуживанию

Результаты поиска

Содержание HL-7050 Series

Отзывы:

Похожие инструкции для HL-7050 Series

Бренды по названию

Популярные бренды