manualshive.com logo in svg

Brother HL-660 Series, Руководство пользователя

Поделиться
Скачать
Brother HL-660 Series Скачать руководство пользователя страница 30

USER’S GUIDE

3–2

English

DATA Lamp

The amber DATA lamp indicates the current status of the print data
process.

Lamp

Printer status

Off

❍

The printer has no print data.

Blinking

❍↔●

The printer is receiving data from the computer or

the printer is processing data in the memory.

On

●

Print data remains in the printer memory. If the

DATA lamp is on for a long period of time and

nothing has printed, you need to press the

SELECT switch to take the printer off-line and

then press the FF/CONT switch to print the data.

MANUAL Lamp

The yellow MANUAL lamp indicates the current paper source or paper
feed method.

Lamp

Printer status

Off

❍

The printer can print continuously by loading

paper from the multi-purpose sheet feeder.

Blinking

❍↔●

Manual paper feed is selected and the printer

prompts you to insert paper in the manual paper

feed slot and press the FF/CONT switch.

ALARM Lamp

The red ALARM lamp blinks to indicate a printer error status. If any
error occurs, the printer indicates the error by blinking the ALARM lamp
with another lamp or by printing an error report.

 

✒

 Note

The READY, DATA and MANUAL lamps are used with the ALARM
lamp to indicate printer errors. See “ALARM INDICATIONS AT A
GLANCE” in Chapter 6 and take corrective action for the error.

Содержание HL-660 Series

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды