Brother HL-2035 Скачать руководство пользователя

Страница: 46 / 93

Control panel

Control panel button (Go button)

The control panel button has the following functions:

Wake-up

If the printer is in Sleep mode, press the

button to wake the printer up and go to the Ready state.

Error recovery

If there is an error, the printer will recover automatically from some errors. If an error is not automatically
cleared, press the

button to clear the error, and then continue to use the printer.

Form feed

If the green

Ready

LED blinks for a long time, press the

button. The printer will print any data that is

left in the printer memory.

Cancel printing

While printing press the

button for about 4 seconds until all the LEDs light up. The

Ready

and

Error

LEDs will flash as the job is being cancelled.

Reprint

To reprint the last document, press the

button for about 4 seconds until all the LEDs light up.

Содержание HL-2035






























































































Результаты поиска

Содержание HL-2035

Отзывы:

Похожие инструкции для HL-2035

Бренды по названию

Популярные бренды

Brother HL-2035, Руководство пользователя

Результаты поиска

Содержание HL-2035

Отзывы:

Похожие инструкции для HL-2035

Бренды по названию

Популярные бренды