Brother HL-1660 Series, Руководство пользователя

Страница: 406 / 448

OPERATION MANUAL
-14-
Q & A
This section contains questions and answers for using the fax function with your printer.
Question Recommendation
The date or time of the sent
/ received report is not
correct. The clock of the printer is adjusted when sending the fax
data.
If the printer is turned off and on, the clock of the printer is
reset to the default value (01/01/1997 00:00).
‘FAX MODE’ is not
displayed on the control
panel. Enter the ‘HIDDEN PANEL’ menu by pressing the SHIFT
and SEL switches. Then, select ‘FAX MODEM=ON’ in
the ‘EXT. FAX MODEM’ menu.
I cannot send any fax data
although the data is sent
from the computer to the
printer.
•
Check that the correct dial type is set. If not, set the
correct dial type in Fax Line Setup of the fax driver.
•
Check if the outside line access code is set correctly. If
not, set it correctly in Outside Line Access Code in
FAX Line Setup of the fax driver.
•
Check if the telephone line is connected correctly.
•
Check if the External Fax Modem is turned on.
•
Check if the printer and the External Fax Modem are
connected correctly.
•
Check that you turned on the External Fax Modem
before turning on the printer.
Fax data is not sent from
the computer to the printer,
and I cannot send any fax
data.
•
Check if the printer port (LPT1 / LPT2 or the network
printer) is correct.
•
Check if the printer cable is connected correctly.
•
Check if the network cable is connected correctly to the
network card of the printer.
I cannot receive fax data.
•
Check if the telephone line is connected correctly.
•
Check if ‘RECEIVE MODE=ON’ is selected on the
control panel. Refer to the
‘Settings on the Control
Panel’ section.
•
Check if the External Fax Modem is turned on.
•
Check if the printer and the External Fax Modem are
connected correctly.
•
Check that you turned on the External Fax Modem
before turning on the printer.