To achieve a good weekly maintenance you will have to do the following actions:
> WEEKLY MAINTENANCE PROCEDURES
>
The black silicon lips of the two cappings should be cleaned with the Cleaning Stick R
dipped in Cleaning Solution.
It is necessary to remove the built-up of the remaining ink staying on the edges of the
cappings. It will prevent air leakage and keep the good suction of the pumps!
Be careful not to touch the foam! Keep it flat!
The four extrusion lances
(see in the blue circle…)
and the hole
sitting on the side of the capping at the Exhaust position need
also to be cleaned and free of dried ink.
Always clean first the hole at the front and go backward while
cleaning the lances !
days
7
!
TO BE DONE EVERY WEEK
7
Suction Cap & Exhaust Cleaning
Exhaust Cleaning
Direction to clean
Suction Cap Cleaning
Menu
>
Maintenance
>
Maintenance Part Clean/Replace
>
and follow instructions on the display
> Always use this menu to perform cleanings or replace parts :
OK
MENU
30
Min
+
Nozzle Guards Cleaning
+
Exhaust Cleaning
+
Wiper Cleaning
+
Suction Cap Cleaning
W E E K L Y M A I N T E N A N C E
WEEKLY MAINTENANCE
