17
3
3
Power Save mode
3
When the machine is idle, you can put the
machine into Power Save mode by pressing
the
Power Save
key. You can still receive
telephone calls in Power Save mode. For
further information on receiving faxes in the
power save condition, please see the table on
on page 18. The delayed faxes
that have been set up will be sent. You can
even retrieve faxes using Remote Retrieval
(See page 55.) if you are away from your
machine. If you want to do other operations,
you must take the machine out of Power Save
mode.
Note
If you have connected an external
telephone or TAD, it is always available.
Putting your machine in
Power Save mode
3
a
Press and hold down the
Power Save
key until the LCD shows
Shutting
Down
.
The LCD light goes off.
Bringing your machine out of
Power Save mode
3
a
Press the
Power Save
key.
Note
• Even if you have put the machine into
Power Save mode, it will periodically clean
the print head to preserve print quality.
• If you unplug the AC power cord, no
machine operations will be available.
• You can customize Power Save mode so
that, apart from automatic head cleaning,
no machine operations are available.
Power Save setting
3
You can customize the machine’s
Power
Save
key. The factory setting is
Fax Receive:On
. Your machine can
receive faxes or calls even when the machine
is in Power Save mode. If you do not want
your machine to receive faxes or calls, turn
this setting to
Fax Receive:Off
.
a
Press
Menu
,
1
,
6
.
b
Press
a
or
b
to choose
Off
(or
On
).
Press
OK
.
c
Press
Stop/Exit
.
General setup
3