sss
™
1143
page
17
1. Rotate the drum unit so the replacement drums are facing down as
shown in Figures 49a and 49b.
Figure 49a
Drum Unit
Figure 49b
Drum Unit
2. Align the tabs on the bottom of the drum unit with the corresponding
holes in the end plates (Figures 50a and 50b).
Figure 50a
Figure 50b
3. Rotate the end plates up and secure each end plate with 5 screws
(Figures 51a, 51b and 51c).
Figure 51a
Drive Side
End Plate
Figure 51b
Drive Side End Plate
Phillips
Screwdriver
Screws
Figure 51c
Contact Side End Plate
Phillips
Screwdriver
Screws
a
ssembling
The
D
rum
u
niT
Holes
Tabs
Holes
Tabs
