Brother DECT BCL-D70, Руководство пользователя

Страница: 31 / 38

Troubleshooting and Routine Maintenance
25
4
Routine maintenance
4
Charging the battery
4
If the battery charge level is getting low, you
should charge the battery. You can see the
battery charge level indicator at the bottom
right of the LCD.
a
Make sure the AC adapter of the cradle
or the machine (base unit) is connected
to an electrical socket.
b
Place the cordless handset in the cradle
with the dial pad facing forward.
Power Off
The machine (base unit) is in Power
Save mode. If you want to make a phone call, press the
Power Save key on your machine (base unit) to
bring your machine out of Power Save mode.
Then press on the cordless
handset to go back to standby mode.
Searching for
Base Unit
(Base Unit
not detected)
The cordless handset is too far
away from the machine (base unit). Move the cordless handset closer to the
machine (base unit).
Your machine (base unit) is not
plugged in. Make sure that the machine (base unit) is
plugged in.
You have not registered the
cordless handset. Register the cordless handset. (See Registering
cordless handsets on page 3.)
The antenna on the right of the
machine (base unit) is in the down
position. Make sure the antenna is in the up position.
Error Message Cause Action