Brother DCP-T520W, Онлайн руководство пользователя, Страница: 340 / 496

Error Message Cause Action
No Paper Fed Tray 1
Paper dust has accumulated on the
surface of the paper pick-up rollers. Clean the paper pick-up rollers.
See
Related Information : Clean the Paper
Pick-up Rollers .
No Response/Busy The number you dialled does not answer
or is busy. Verify the number and try again.
Not Registered You tried to access a Speed Dial number
that has not been stored in the machine. Set up the Speed Dial number.
Out of Fax Memory The fax memory is full. Print the faxes that are in the memory.
See
Related Information : Print a Fax
Stored in the Machine's Memory .
Out of Memory The machine's memory is full. If a fax-sending or copy operation is in
progress:
•
Press Stop/Exit and wait until the
other operations that are in progress
finish, and then try again.
• Press
c
to select
Partial Print
to
copy the pages scanned so far.
• Print the faxes that are in the memory.
See
Related Information : Print a Fax
Stored in the Machine's Memory .
Paper Size Mismatch The paper size setting does not match the
size of paper in the tray.
-
OR -
You did not set the paper guides in the
tray to the indicators for the paper size
you are using.
1. Check that the paper size you chose
on the machine's display matches the
size of the paper in the tray.
See
Related Information : Change the
Paper Size and Paper Type .
2. Make sure you loaded the paper in a
Portrait position, by setting the paper
guides at the indicators for your paper
size.
See
Related Information : Load Paper .
3. After you have checked the paper size
and the paper position, press
c
.
If you are printing from your computer,
make sure the paper size you selected in
the printer driver or in the application you
use to print matches the size of paper in
the tray.
See
Related Information : Print Settings
(Windows) .
Refill Ink The amount of remaining ink in one or
more of the ink tanks is low. The machine
will stop all print operations.
This error message may appear if the ink
dot counter is incorrect even if some ink
remains. Refill the ink tank.
When you refill the ink tank, fill the ink up
to the upper line, or fill with all of the ink in
the bottle if it does not exceed the upper
line.
A message may appear on the LCD to
verify whether the ink tanks were refilled.
Press
c
(
Yes
) to reset the ink dot counter
for the refilled colour. Press
d
(
No
) for the
non-refilled colours.
See
Related Information : Refill the Ink
Tanks .
• You can still scan even if the ink is low
or needs to be refilled.
The maximum number of
devices are already The maximum number of mobile devices
are already connected to the Wi-Fi Direct After the current connection between your
Brother machine and another mobile
334