Scanning
163
10
Scanning an image into your Macintosh
®
10
You can scan a whole page, or a portion by pre-scanning the document.
Scanning a whole page
10
a
Load your document.
b
Adjust the following settings, if needed, in the Scanner Setup dialog box:
Resolution
Scan Type
Scanning Area
Document Size
Brightness
Contrast
c
Click
Start
.
When scanning has finished, the image appears in your graphics application.
Pre-Scanning an image
10
The
PreScan
button is used to preview and also lets you crop any unwanted areas from the image. When
you are satisfied with the preview, click the
Start
button in the Scanner Setup dialog box to scan the image.
a
Load your document.
b
Click
PreScan
.
The whole image is scanned into your Macintosh
®
and appears in the
Scanning Area
.
c
Drag the mouse pointer over the portion you want to scan (1).
1