(For U.K.) (For Others)
1
2
3
4
1
2
3
Product Safety Guide
Telephone Line Cord
For MFC models
For DCP models
c
Go to step
4
For MFC models
c
Go to step
5
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
Waste Toner Box
(pre-installed)
Power Cord
Quick Setup Guide
Basic User’s Guide
For MFC models
CD-ROM
Belt Unit
(pre-installed)
Read the Product Safety Guide first, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The components included in the box and the AC power plug
•
connection may differ depending on your country.
The illustrations in this Quick Setup Guide are based on the
•
MFC-L8850CDW.
You must purchase the correct interface cable for the interface you
•
want to use:
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 6 feet (2 metres) long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
After turning on the machine, the Touchscreen displays the list of languages you can
1.
select.
Swipe up or down, or press
a
or
b
to display your language, and press your language.
Press
OK
.
The Touchscreen prompts you to confirm your selection.
2.
If the Touchscreen shows the correct language, press
Yes
.
—OR—
Press
No
to go back to step
1
to choose the language again.
NOTE:
If you have set the wrong language, you can change the language from the
button on the
Touchscreen.
(
,
All Settings
,
Initial Setup
,
Local Language
)
1
Remove the packing material from the machine
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
4
Select your language (for DCP models)
Quick Setup Guide
DCP-L8400CDN / DCP-L8450CDW
MFC-L8650CDW / MFC-L8850CDW / MFC-L9550CDW
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Version 0
UK/IRE
