Brother DCP-L5500DN страница 53 Скачать руководство пользователя

Страница: 53 / 724

Home >

Paper Handling

Load Documents

> Load Documents in the Automatic Document Feeder (ADF)

Load Documents in the Automatic Document Feeder (ADF)

Use the ADF when copying or scanning multiple-page, standard-sized documents.

•

The ADF can hold the following pages and feed each sheet individually:
-

(DCP-L5500DN)
up to 40 pages

(MFC-L5700DW)
up to 50 pages

(DCP-L5600DN/DCP-L5650DN/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW)
up to 70 pages

(MFC-L6800DW)
up to 80 pages

•

Use standard 20 lb (80 g/m

) paper.

•

Make sure documents with correction fluid or written in ink are completely dry.

IMPORTANT

•

DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.

•

DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted, or taped.

•

DO NOT use cardboard, newspaper, or fabric.

•

To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.

Document Sizes Supported

Length:

5.8 to 14.0 in. (147.3 to 355.6 mm)

Width:

4.1 to 8.5 in. (105 to 215.9 mm)

Weight:

17 to 24 lb (64 to 90 g/m

)

1. Unfold the ADF document output support flap.

2. Fan the pages well.
3. Stagger the pages of your document and load it

face up

and

top edge first

, into the ADF as shown in the

illustration.

Содержание DCP-L5500DN




















































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DCP-L5500DN

Отзывы:

Похожие инструкции для DCP-L5500DN

Бренды по названию

Популярные бренды

Brother DCP-L5500DN, Руководство пользователя

Результаты поиска

Содержание DCP-L5500DN

Отзывы:

Похожие инструкции для DCP-L5500DN

Бренды по названию

Популярные бренды