Brother DCP-J552DW, Основное руководство пользователя

Страница: 32 / 124

Chapter 2
24
Paper settings
2
Paper Type
2
To get the best print quality, set the machine
for the type of paper you are using.
a
Press (
Settings
).
b
Press .
c
Press
a
or
b
to display
Plain Paper
,
Inkjet Paper
,
Brother BP71
,
Other Glossy
or
Transparency
,
and then press the option you want to
set.
d
Press .
NOTE
The machine ejects paper with the printed
surface face up onto the paper tray at the
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Paper Size
2
You can use the following sizes of paper for
printing copies: A4, A5, Photo (10

15 cm),
Letter and Legal
1
. When you change the size
of paper you load in the machine, you will
need to change the paper size setting at the
same time.
a
Press (
Settings
).
b
Press .
c
Press
a
or
b
to display
A4
,
A5
,
10x15cm
,
Letter
or
Legal
1
and then
press the option you want to set.
d
Press .
1
Only available for some countries.
Acceptable paper and
other print media
2
The print quality can be affected by the type
of paper you use in the machine.
To get the best print quality for the settings
you have chosen, always set the Paper Type
to match the type of paper that is loaded in
the tray.
You can use plain paper, inkjet paper (coated
paper), glossy paper, transparencies and
envelopes.
We recommend testing various paper types
before buying large quantities.
For best results, use Brother paper.

When you print on inkjet paper (coated
paper), transparencies and glossy paper,
be sure to choose the correct print media
in the
Basic tab of the printer driver or in
the Paper Type setting of the machine’s
menu.
(See Paper Type on page 24.)
 When you print on Brother Photo paper,
load one extra sheet of the same photo
paper in the paper tray. An extra sheet has
been included in the paper package for
this purpose.
 When using transparencies or photo
paper, remove each sheet at once to
prevent smudging or paper jams.

Avoid touching the printed surface of the
paper immediately after printing; the
surface may not be completely dry and
may stain your fingers.