Brother DCP-J4110DW, Основное руководство пользователя

Страница: 79 / 123

Troubleshooting
71
B
Ink is smudged or running when
using glossy photo paper. Be sure to check the front and back of the paper. Place the glossy surface (printing
surface) face down. (See
Paper Type on page 24.)
If you use glossy photo paper, make sure that the paper type setting is correct.
Prints appears dirty or the paper
jams when using A3 paper.
(PC print for Windows
®
)
Check Slow Drying Paper in the Basic tab of the printer driver.
(PC print for Macintosh)
Select Print Settings from drop-down list and then check Slow Drying Paper in
the printer driver.
(Copy)
Adjust the copy density to make copies lighter. (See Advanced User’s Guide:
Adjusting Density .)
Stains appear on the reverse side
or at the bottom of the page. Make sure the printer platen is not dirty with ink. (See Advanced User’s Guide:
Cleaning the machine’s printer platen .)
Make sure you are using Brother Original Innobella™ ink.
Make sure you are using the paper support flap.
(See
Loading paper and other print media on page 12.)
Make sure the paper feed rollers are not dirty with ink.
(See Advanced User’s Guide:
Cleaning the paper feed rollers .)
The machine prints dense lines on
the page.
(Windows
®
only)
Check Reverse Order in the Basic tab of the printer driver.
The printouts are wrinkled.
(Windows
®
)
In the printer driver Advanced tab, click Colour Settings and uncheck
Bi-Directional Printing .
(Macintosh)
In the printer driver, choose
Print Settings , click Advanced , choose
Other Print Options and uncheck Bi-Directional Printing .
Make sure you are using Brother Original Innobella™ ink.
Paper Handling Difficulties
Difficulties Suggestions
The machine does not feed paper. Make sure the Jam Clear Cover at the back of the machine is closed.
If the Touchscreen shows the Paper Jam message and you still have a problem,
see
Error and Maintenance messages on page 54.
If there is no paper, load a new stack of paper into the paper tray.
If there is paper in the paper tray, make sure it is straight. If the paper is curled,
you should straighten it. Sometimes it is helpful to remove the paper, turn the stack
over and put it back into the paper tray.
Reduce the amount of paper in the paper tray, and then try again.
Clean the paper pick-up rollers.
(See Advanced User’s Guide: Cleaning the paper pick-up rollers .)
Photo paper does not feed
correctly. When you print on Brother Photo paper, load one extra sheet of the same photo
paper in the paper tray. An extra sheet has been included in the paper package
for this purpose.
Print Quality Difficulties (continued)
Difficulty Suggestions