Brother DCP-9045CDN Скачать руководство пользователя страница 174

Страница: 174 / 182

166

Interfaces

Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB
1.1 interface.

Third party USB ports are not supported.

PictBridge

Direct print feature

The data including JBIG2 image file, JPEG2000 image file and layered files are not supported.

USB

Use a USB 2.0 interface cable that is no longer than 2.0 m (6 feet).

LAN cable

Use an Ethernet UTP cable category 5 or greater.

Compatibility

Supports the Camera & Imaging Products Association PictBridge
standard CIPA DC-001.

Visit http://www.cipa.jp/pictbridge for more information.

Interface

USB direct interface

Compatibility

PDF version 1.6

, JPEG, Exif + JPEG, PRN (created by

DCP-9045CDN printer driver), TIFF (scanned by all Brother MFC or
DCP models), PostScript

™ (created by DCP-9045CDN

BR-Script 3 printer driver)

Содержание DCP-9045CDN























































































































































































Результаты поиска

Содержание DCP-9045CDN

Отзывы:

Бренды по названию

Популярные бренды

Brother DCP-9045CDN, Руководство пользователя

Результаты поиска

Содержание DCP-9045CDN

Отзывы:

Бренды по названию

Популярные бренды