Brother DCP-7057R, Руководство пользователя

Страница: 25 / 80

Configuring your machine for a wireless network (For HL-2280DW, DCP-7070DW and MFC-7860DW)
20
3
Using the Brother installer application on the CD-ROM to configure your
machine for a wireless network
3
For installation, see Wireless configuration using the Brother installer application (For HL-2280DW,
DCP-7070DW and MFC-7860DW) on page 22.
Using the PIN Method of Wi-Fi Protected Setup
3
If your WLAN access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the
machine easily. The PIN (Personal Identification Number) Method is one of the connection methods
developed by the Wi-Fi Alliance
®
. By inputting a PIN which is created by an Enrollee (your machine) to the
Registrar (a device that manages the wireless LAN), you can setup the WLAN network and security settings.
See the user’s guide supplied with your WLAN access point/router for instructions on how to access the
Wi-Fi Protected Setup mode.
Note
Routers or access points that support Wi-Fi Protected Setup have a symbol as shown below.
a
Press Menu .
b
Press
a
or
b
to choose
Network
.
c
Press
a
or
b
to choose
WLAN
.
d
Press
a
or
b
to choose
WPS w/PIN Code
.
e
The LCD will show an 8 digit PIN and the machine starts searching for a WLAN access point/router for
up to 5 minutes.
Connecting WPS
PIN:XXXXXXXX
f
Using a computer that is on the network, type “
http://access point’s IP address/
” into your
browser. (Where “
access point’s IP address
” is the IP address of the device that is used as the
Registrar
1
) Go to the WPS (Wi-Fi Protected Setup) setting page and input the PIN which the LCD shows
in step
e
to the Registrar and follow the on-screen instructions.
1
The Registrar is normally the WLAN access point/router.
Note
The setting page is different, depending on the brand of WLAN access point/router. See the instructions
supplied with your WLAN access point/router.