Brother DCP-6690CW, Руководство по обслуживанию, Страница: 275 / 506

6-94 Confidential
6.1.18 Paper Tray ASSY #2
(1) Place the paper tray ASSY #2 upside down.
(2) Out of the four pawls of LT bank ASSY, first release the two at both ends. Then, while
pulling up the right (or left) lock arm slightly with the edge of a scale or the like, release the
right inside (or left inside) pawl of the LT bank ASSY from the paper tray #2. Then do the
same for the other lock arm and pawl.
(3) If the base pad needs to be replaced, peel it off the bottom of the paper tray #2.
Note: Once removed, the base pad will become unusable and a new pad will have to be put
back in.
„
Assembling Notes
• When attaching a new base pad to the paper tray #2, align the edge of the base pad with the
front edge of the depressed section on the paper tray #2 as shown above.
• When mounting the LT bank ASSY, first fit the four rear latches on their support openings in
the paper tray #2 and fit the four front pawls on the openings in the bottom of paper tray #2.
Then press the top of the LT bank ASSY so that the four rear latches snap into place.
Align the edge of the
base pad with the front edge
of the depressed section on the
paper tray #2.
(6_82)
LT bank ASSY
LT bank ASSY
Pawls
Base pad
Paper tray #2
Depressed
section
Base pad
Pawls
Rear bottom view of paper tray #2
Pawl
Pawl
Lock arms
Paper tray #2
Latches on the back
of the LT bank ASSY