Brother DCP-1400 Скачать руководство пользователя страница 167

Страница: 167 / 255

- 21

[ 5 ] Print-image related

If the received or sent image has any problem, first make a copy with the machine.

If the copied image is normal, the problem may be due to the remote terminal; if it is abnormal,
proceed to the following checks:

Trouble

Action to be taken

(1) Completely blank

At the scanner
Check the following components:

- CCD flat cable
- CCD unit
- Main PCB

At the printer side

Clean the high-voltage contacts for the developer roller on

the drum unit, main cover, and high-voltage power supply

PCB. (Contacts

in the illustration given on page

-28)

Clean the grounding contacts on the drum unit, main cover,

and high-voltage power supply PCB. (Contacts

in the

illustration given on page

-28)

Replace the toner cartridge.

Replace the drum unit.

Check the connection of the laser flat cable on the main PCB.

Replace the main PCB.

Replace the laser unit.

Replace the high-voltage power supply PCB.

(2) All black

At the scanner
Check the following components:

- CCD flat cable
- CCD unit
- Main PCB

At the printer side

Clean the high-voltage contacts for the grid and charger on

the drum unit, main cover, and high-voltage power supply

PCB. (Contacts

and

in the illustration given on page

28)

Clean the charger (corona wires) itself.

Check the connection of the laser flat cable on the main PCB.

Replace the drum unit.

Replace the high-voltage power supply PCB.

Replace the main PCB.

Содержание DCP-1400
































































































































































































































































Результаты поиска

Содержание DCP-1400

Отзывы:

Бренды по названию

Популярные бренды

Brother DCP-1400, Руководство по обслуживанию

Результаты поиска

Содержание DCP-1400

Отзывы:

Бренды по названию

Популярные бренды