Brother CS9100 Скачать руководство пользователя

Страница: 73 / 80

Remove the bobbin case.

Grasp the bobbin case, and then pull it out.

Bobbin case

Use the cleaning brush or a vacuum cleaner to
remove any dust from the race and its
surrounding area.

Cleaning brush

Race

• Do not put oil on the bobbin case.

Insert the bobbin case so that the

mark on

the bobbin case aligns with the

mark on the

race.

• Align the

and

marks.

mark

• Make sure that the indicated points are

aligned before installing the bobbin case.

Put the tabs on the needle plate cover into the
needle plate, and then slide the cover back on.

●

Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case (part code: XE7560-001), contact your
nearest authorized service center.

●

Make sure that you fit the bobbin case
properly, otherwise the needle may break.

CAUTION

www.SewingSupplyWarehouse.com

Содержание CS9100

















































































Результаты поиска

Содержание CS9100

Отзывы:

Похожие инструкции для CS9100

Бренды по названию

Популярные бренды

Brother CS9100, Руководство по эксплуатации

Результаты поиска

Содержание CS9100

Отзывы:

Похожие инструкции для CS9100

Бренды по названию

Популярные бренды