11
For Wireless Network Users
Wirele
ss Network
For wireless network interface users
9
Before you begin
10
Choose your wireless setup method
The following instructions will offer three methods for setting up your Brother machine on a wireless network.
Choose the method you prefer for your environment.
Method
is the recommended way to connect (Windows
®
or Macintosh).
NOTE
If you have previously configured the wireless settings of the machine, you must reset the network settings
before you can configure the wireless settings again.
On your machine, press
(
Settings
). Press
All Settings
.
Press
a
or
b
to display
Network
. Press
Network
.
Press
a
or
b
to display
Network Reset
. Press
Network Reset
.
Press
Yes
to accept. Hold down
Yes
for two seconds to confirm.
NOTE
To set up your machine in Ad-hoc mode (connected to a wireless-capable computer without an access
point/router), see instructions in the
Software and Network User’s Guide
on the CD-ROM.
To view the
Software and Network User’s Guide
:
1 Turn on your computer. Insert the CD-ROM into your CD-ROM drive.
For Windows
®
:
2 Choose your model and the language. The CD-ROM top menu will appear.
3 Click
User’s Guides
, and then click
PDF/HTML documents
.
4 Click
Software and Network User’s Guide
.
For Macintosh:
2 Double-click
User’s Guides
. Choose your model and the language.
3 Click
User’s Guides
, and then click
Software and Network User’s Guide
.
a
Setup using the CD-ROM (Windows
®
and Macintosh)
• It is recommended that you use a computer wirelessly connected to your network for this method.
• A USB cable might be needed in some cases.
Now go to
