59
3
■
Changing the stitch width
Press the “+” or “–” side of the stitch width key to
adjust the stitch width.
a
Stitch width key
b
Stitch width
c
Narrow
d
Wide
Memo
●
Before sewing buttonholes, check the stitch
length and width by sewing a trial
buttonhole on a scrap piece of fabric.
Button sewing
Buttons can be sewn on with the sewing machine.
Buttons with 2 or with 4 holes can be attached.
a
Measure the distance between the holes in the
button to be attached.
b
Raise the presser foot lever, and then slide the
drop feed lever, located at the rear of the
machine on the base, to
(to the left as
seen from the rear of the machine).
a
Drop feed lever (as seen from the rear of
the machine)
X
The feed dogs are lowered.
c
Turn on the sewing machine.
d
Select stitch
.
e
Attach button fitting foot “M”.
• For details, refer to “Replacing the presser
foot” (page 31).
f
Adjust the stitch width so that it is the same as
the distance between the holes in the button.
a
b
–
+
a