24
Seam Guide
Tighten the screw securely
1
with a screwdriver since it
might otherwise loosen due to
vibration.
a
Installation
Adjustment
Turn adjustment screws as arrow
images suggest to set the position of
the Seam Guide foot.
Fabric Separator (for
joining lining to fabric)
Use this technique for sewing
✽
velvet and lining together.
Raise needle and foot.
1
Move separator so it sits under
2
presser foot.
Make sure it is lined up so that
3
the needle passes through the
slot of the separator without
hitting the plate itself.
Secure liner plate in place with
4
lining plate screws.
Set pressure of sewing feet
5
and feed position to pin feeding
position.
Pull thread until lower needle
6
catches fabric.
Sew 2-3 reinforcement stitches.
✽
When not using separator, it
7
can be swung off to the side as
illustrated in drawing.
Fabric
Separator
Needle
Separator
Needle
Separator
Lining
Velvets
Note
• Lighten the presser foot pressure slightly when using the fabric separator.
• Use the separator to neatly sew 2 layers of hard to manage fabrics together by keeping them
from interacting with one and other before the needle sews them together in a perfect seam.
