Brother 681B-UG Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 39

background image

Check List for Better Sewing

Check this list if you are having the following problems:

IF MATERIAL IS NOT FED

1.  Feed dog is down .
2.  Stop motion knob is loose.
3.  Stitch length regulator is at 0.

IF NEEDLE BREAKS

1.  Needle is inserted incorrectly.
2.  Needle clamp screw is loose.
3.  Bent needle is used.
4.  Upper threading is not correct.
5.  Upper thread tension is too tight.
6.  Wrong needle and thread for cloth being

sewn are used.

7. Material pulled excessively.

IF LOOPS FORM ON FABRIC

1. Tension of upper or lower thread is

wrong.

IF MATERIAL SHOULD PUCKER

1.  Thread tension is too tight.
2.  Threading is not correct.
3.  Thread is caught by something.
4. Lower thread is unevenly wound on

bobbin.

IF UPPER THREAD BREAKS

1.  Upper threading is not correct.
2.  Upper thread is too large for needle eye.
3.  Upper thread tension is too tight.
4.  Needle is inserted incorrectly.

IF LOWER THREADS BREAKS

1.  Lower thread is entangled in shuttle.
2.  Lower thread tension is too tight.
3.  Lower threading is not correct.

IF MACHINE SKIPS STITCHES

1.  Needle is not sharp and straight.
2.  Needle is inserted incorrectly.
3.  Wrong needle and thread for cloth being

sewn are used.

4. Upper threading is not correct.
5. Lint is clinging to under-side of needle
plate.

-34-

«
...
34
35
36
37
38
...
»

Содержание 681B-UG








































Отзывы:

Нет отзывов

Похожие инструкции для 681B-UG

Бренд: UNITED Страницы: 15

Бренд: JUKI Страницы: 5

Бренд: Jack Страницы: 58

Бренд: SunStar Страницы: 35

Бренд: Mega Страницы: 10

Бренд: Radio Shack Страницы: 20

Бренд: Nilfisk-Advance Страницы: 84

Бренд: Everest Страницы: 71

Бренд: Ameriphone Страницы: 108

Bona FlexiSand 1.5

Бренд: Kunzle & Tasin Страницы: 156

Бренд: Seiko Страницы: 19

Бренд: Philips Страницы: 3

Бренд: Renz Страницы: 15

QUILT EXPRESSION 4

Бренд: Pfaff Страницы: 4

Бренд: COVERBIND Страницы: 17

Бренд: GUANGZHOU SEANY Страницы: 5

Бренд: Thermax Страницы: 24

Бренд: Olympia Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды