Brother 580MC Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 115

background image

I M P O R T A N T I N F O R M A T I O N

12 - 3

WARNING

For protection against the risk of electrical shock, always disconnect all cables from
the wall outlet before servicing, modifying or installing the equipment.

This equipment may not be used on coin service lines provided by the telephone
company or connected to party lines.

Brother cannot accept any financial or other responsibilities that may be the result of
your use of this information, including direct, special or consequential damages.
There are no warranties extended or granted by this document.

Important Safety Instructions

1

Read all of these instructions and save them for future use.

2

Follow all warnings and instructions marked on the product.

3

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.

4

Do not use this product near water.

5

Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.

6

Slots and openings in the cabinet and the back or bottom of the machine are provided
for ventilation; to ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should never be placed near or over a radiator or heater. This product
should never be placed in a built-in installation unless proper ventilation is provided.

7

This product should be operated from the type of power source indicated on the label.
If you are not sure of the type of power available, consult with your dealer or local
power company.

8

This product is equipped with a 3-wire grounding type plug. This plug will fit into only
a grounding-type power outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace your obsolete outlet. Do not
defeat the purpose of the grounding-type plug.

9

Do not allow anything to rest on the power cord. Do not place this product where
people can walk on the cord.

10

If an extension cord is used with this product, make sure that the total ampere ratings
on the products plugged into the extension cord do not exceed ampere rating of the
extension cord ampere rating. Also, make sure that the total of all products plugged
into the wall outlet does not exceed 15 amperes (USA only).

11

Do not place anything in front of the fax machine that will block the exit- path of sent
documents, originals and received faxes.

12

Do not touch an original during printing.

«
...
81
82
83
84
85
...
»

Содержание 580MC




















































































































Отзывы:

Нет отзывов

Похожие инструкции для 580MC

Бренд: Jack Страницы: 7

Бренд: Jack Страницы: 22

Бренд: Pfaff Страницы: 122

Бренд: Singer Страницы: 9

EXPRESSION 2028

Бренд: Pfaff Страницы: 4

Бренд: Numatic Страницы: 52

Бренд: Singer Страницы: 11

Бренд: Renkforce Страницы: 52

Бренд: GBC Страницы: 18

AMS-210E Series

Бренд: JUKI Страницы: 243

Бренд: GBC Страницы: 25

Бренд: JUKI Страницы: 12

Бренд: Baby Lock Страницы: 40

Бренд: JUKI Страницы: 2

TORO 4011 LA-37

Бренд: artisan Страницы: 28

Бренд: Singer Страницы: 4

Бренд: Mitsubishi Electric Страницы: 12

Бренд: Mitsubishi Electric Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды