Brotech Electronics Mini Midi Se User Manual 2020-01-01
When the demonstration is finished, just stop playing songs and the post play delay timer will count down to
zero and power off the blower or instrument.
Keywords:
PrePlayCommand -> 0:0;
Play this note before playing each single or group of songs; it is held on
for ¼ second. Default = 0:0 (disabled)
PostPlayCommand -> 0:0;
Play this note after playing each single or group of songs; it is held on
for ¼ second. Default = 0:0 (disabled)
PrePlaySongDelay -> 8;
Pre song or group of songs play delay in seconds, 0 – 600. Default = 8seconds
PostPlaySongDelay -> 8;
Post song or group of songs play delay in seconds, 0 - 600. Default = 8 seconds
* Operating Note: once PrePlaySongDelay timer is started it cannot be interrupted
ShowRootDirectories: Always show the directories in the {/Root}, no matter what directory or subdirectory is
active. Depending on how one sets up the SD memory card directory and file structure, this can help with
navigation. Only works with units shipped after 2020-01-01. Can be YES, ENABLE (Default), or NO
Special Order Features
ExternalSwitchPlay, SwitchCountPerPlay, SwitchDebounceTime (extra cost): Play music with an external switch
closure. This can be used with a coin trip mechanism, or an external keyfob style button RF switch. To use this
feature, enable the keyword, ExternalSwitchPlay -> with the playing mode, either SEQUENTIAL or RANDOM.
On the supplied adapter cable, wire the two contacts from the mMS to the common and normally open contacts of
the external switch, momentary or latching close. When the switch closes, a song will begin playing in the selected
mode. During play the mMS will monitor the input even while playing, and keep track of the number of times the
external switch closes. It will continue playing songs in the selected play mode, until the switch counter goes to
zero.
Keywords:
ExternalSwitchPlay -> SEQUENTIAL or RANDOM or OFF or DISABLE (default = DISABLE)
SwitchDebounceTime -> 500; Set the switch debounce time in milliseconds, 100 – 1000. Default = 500 msecs
SwitchCountPerPlay -> 1; Set the number of external switch trips to play one song, 1 - 8 allowed. Default = 1
* Operating Notes:
1) Even when this feature is enabled, the unit can still be controlled normally with a tablet by simply linking the
tablet to the hardware. The Bluetooth link has priority over the external switch. Linking the tablet also clears the
external switch counter.
2) The circuit is optically isolated just like the standard midi interface.
3) The switch digital debounce time is used to prevent false triggers due to contact closure electrical noise (contact
chatter).
SecurePlay: Will only play authorized midi songs that have an embedded key. This feature is available to system
integrators and music resellers. Contact us for additional information.
