Step 1
F x 1
E x 5
D x 5
M
M
80
Align the seat
(1)
to the back rest
(2)
so that the
screw slots overlap. Fit a washer
(E)
to a 80mm bolt
(D)
and place it into one of the screw holes. Turn the
bolt with the allen key
(F)
until it is secure.
Repeat for all five bolts.
Step 2
Lay down the chair so that the underside of the seat
is facing you. Align one front leg
(A)
over the screw
slots so that they overlap. Fit a washer
(E)
to a 60mm
bolt
(C)
and place it into one screw hole. Turn the
bolt with the allen key
(F)
until it is secure, but do not
tighten yet. Repeat for the other two bolts for that leg.
Repeat those steps again for the second front leg
(A)
as well as for the left and right back legs
(B
(L)
& B
(R)
)
in
their correct positions on the chair.
X5
D
E
F
1
2
A
C
E
F
A
A
B
(L)
B
(R)
F x 1
E x 12
C x 12
B
(R)
x 1
B
(L)
x 1
A x 2
60 M
M
