BROSA Dakota Pendant Light Скачать руководство пользователя страница 3

Safety

1. For indoor use only.
2. This light must be installed by a qualified electrician.
3. Follow instructions carefully. Any deviations may be hazardous, or 
void your warranty.
4. If the external cable is damaged, it should be replaced immediately 
by a certified electrician.
5. Always shut off power to the circuit before starting installation work.
6. The fitting is double insulated.
7. Under no circumstances may any part of it be attached to an earth 
wire or terminal.
8. Connect the switched live conductor of your house wiring (normally 
Brown or Red) to the live terminal or wire which is marked “L” or “Live” 
and/or coloured Brown. Connect the neutral conductor of your house 
wiring (normally Blue or Black) to the neutral terminal or wire which is 
marked “N” or “Neutral” and/or coloured Blue.
9. Double check all the connections are secure and that no loose 
strands of wire are left out of the connector.
10. Never use a bulb of a greater wattage than recommended.
11. This product is not suitable for children under 14 years of age.
12. Periodically check and re-tighten all screws and fasteners.
13. Switch off and wipe down your light with a clean cloth as needed.
14. Firmly secure all pieces. Small parts may present a choking hazard. 

Notes:
1. Bulb is not included.
2. The cable length can be adjusted.
3. If the glass is cracked or broken, please stop using the product.

MAX.25W     E27
220-240V ~ 50Hz 

Содержание Dakota Pendant Light
















Отзывы: