Brookstone Wireless music system for iPod, Руководство пользователя

Страница: 9 / 14

iPOD DOCK OPERATION
connecting your iPod or other audio source to the dock
1. Insert one end of the DoCk PoWer ADAPter into DC In
and the other end into an electrical outlet.
2. Plug your iPod into the iPod JACk. If you are using another
audio source, insert
one end of the included 3.5MM CAbLe
into AUX In and the other end into your audio source's
headphone jack.
Note: the dock charges your iPod when it is connected
to the iPod JACk.
inserting the rechargeable battery Packs
1. remove the speaker(s) reAr CoVer. see Figure 1.
2. Insert the included rechargeable battery pack(s).
3. replace the reAr CoVer.
charging the sPeakers
Charging time is approximately 12 hours.
1. Insert one end of the CHArGInG bAse PoWer ADAPter into the
CHArGInG bAse’s cord and the other end into an electrical outlet.
2. Place the sPeAker bottoM on the CHArGInG bAse.
A red indicator light illuminates inside the speaker.
using the sPeakers
you can leave the speakers connected to the CHArGInG bAse,
or you can remove them and use the rechargeable battery power.
Note: ensure the dock and speaker(s) are set to the same channel.
1. slide CHAnneL 1/2/3 on the dock to CHAnneL 1, 2 or 3.
2. Press on the remote control to turn the dock on.
the iPod in the jack turns on automatically.
15 14
Figure 1