8
9
INSERTING AND ACTIVATING THE BATTERIES
1 .
Remove the Battery Case from the Battery Pocket .
2 . Using a screwdriver, remove the screw from the back of the Battery Case and
slide the back off of the Battery Case .
3 . Insert two AA batteries (included), following the polarity indicators .
4 . Slide the back onto the Battery Case, pressing to insert the tab into the slot at
the bottom of the case .
5 . Slide the Battery Activation Switch to the ON position .
6 . Reinsert the Battery Case into the Battery Pocket .
OPERATION
1 .
Follow the above instructions to insert and activate the batteries .
2 . Position the massager where you can lie on it or press against it comfortably .
3 . The massager can be used with or without vibration . For vibration, press the
Power Button to turn on the massager at low vibration intensity . Press again for
high vibration intensity .
4 .
Press the Power Button a third time to turn off the massager .
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE/ACTION
The product does not work
Ensure that the batteries are not depleted .
Ensure that the batteries have been inserted in the correct polarity
position (positive and negative ends correctly aligned) .
Press the Power Button . Pressing once turns the massager on low
vibration intensity . Pressing a second time turns on high vibration
intensity . Pressing a third time turns the massager off .
There is a motor sound
during operation
The motor is a mechanical mechanism and makes a humming sound
during operation . This is normal .
CARE AND MAINTENANCE
• Spot clean only .
• Wipe dust and dirt off the massager with a dry, soft cloth after use .
• Keep the massager clean and away from places of high humidity .
• Remove the batteries when not in use .
