Brookstone S10, Руководство пользователя

Страница: 8 / 11

BUTTON DESCRIPTION
Custom
Massage
Shiatsu Press for Shiatsu massage . Press up to 3 times to increase speed .
Press a 4th time to turn off . Can add Tapping at the same time .
Default zone is full body .
Tapping Press for Tapping massage . Press up to 3 times to increase speed .
Press a 4th time to turn off . Can add Shiatsu at the same time .
Default zone is full body . To adjust the massage feel, use the width
button to vary the node width .
Rolling Press for Rolling massage . Press again to turn off . Cannot be
combined with Tapping or Shiatsu . To adjust the massage feel, use
the width button to vary the node width .
Width Press to cycle through the 3 massage node roller widths: Narrow,
Medium, and Wide . The default is Medium . Used with Rolling and
Tapping massages . Cannot be used in Shiatsu mode .
Adjust-
ments
Target Press once and the nodes will stop at their current location . Press a
second time and the nodes will move up and down, but will remain
in the current zone . Press a third time and the nodes will resume
full track movement .
Zone Press to select the area of the back that you would like the
massage to focus on . Each press cycles through the full body,
upper body, and lower body zones .
Up While the rollers are moving, press and hold to move the rollers up
to the desired location . Used in the Target mode and in the M1 or
M2 memory setup .
Down While the rollers are moving, press and hold to move the rollers
down to the desired location . Used in the Target mode and in the
M1 or M2 memory setup .
12
BUTTON DESCRIPTION
M1 Memory setting 1 for preset node height adjustment .
After powering on the massager, set the node height adjustment
as described on Page 9 . To retain the height adjustment setting for
future massage sessions, press and hold M1 for two seconds .
Once saved, you can use the preset height setting by pressing M1
before selecting your massage .
To reset M1, you must restart the massager .
M2 Memory setting 2 for preset node height adjustment .
After powering on the massager, set the node height adjustment
as described on Page 9 . To retain the height adjustment setting for
future massage sessions, press and hold M2 for two seconds .
Once saved, you can use the preset height setting by pressing M2
before selecting your massage .
To reset M2, you must restart the massager .
13